PostYou are now at: Home » Products » Electrical & Electronics »

100Watt Precision Soldering Station Eddy Current Heating Temperature Calibration

Click image to view original image
Price: 1000.00USD/Piece
Delivery: Shipment within 3 days since the date of payment
Address: China
Valid until: Never Expire
Updated on: 2017-10-12 18:16
Hits: 12035
Company Detail


Temperature Calibrating Function High Frequency Soldering Station 100Watt



Theory YMK High Frequency Soldering Station:

Adopt high frequency eddy current heating (induction heating principle), High frequency Lead free soldering station is heat up at soldering tip itself, and no heat conduction, reduce thermal losses, heat up fast and temperature returning quickly.



Soldering Station Arguments:


Power 100W
Output voltage AC36V,380KHZ
Temperature range 50~600 °C (depending on the mode setting)
Maximum ambient temperature 42 °C
Temperature stability ±2 °C (in still air, no load)
Housing Material Aluminum Alloy
Size 110*105*155mm
Net weight 2.5KG



Technology YMK Soldering Station:

Reliability and security much higher than the switch power supply.

High quality ring transformer.
Rolled iron core uses the new high quality silicon steel sheet.
Winding adopts high temperature resistant high quality copper enameled wire enameled wire winding.
Power wastage loss less than 25%, electrical efficiency is as high as above 95%.
Unload current Only 10% from the EI type; no electromagnetic radiation and no vibration noise.



Main Materials:


Part Name Specification Description
surface frame 115*108*9mm ABS material
protective sheet 25*50*1.5mm tempered (Acrylic) glass
button 11.5*8mm ABS material
panel 110*105*1mm metal materials
power switch 22mm,6A250VAC silver alloy contacts
back cover 105*110*1mm metal materials
power cord 1.5m,6A/250V 3core
aviation socket GX16-6P(B) metal material
cooling fan No dimensions,50*50*12mm
power transformer RT-100 high quality ring
control board HF-005 glass plate
drive circuit board HF-001 glass plate
grounded Block 8*4mm alloy plus temp materials
power outlet 10A250VAC copper temp materials
fuse 2A/250V 5*20mm,slow blow type
Electromagnetic iron SI-100 electromagnetic heating



Auto Sleep Mode Operation:


If you have been chose the working mode with “ auto sleep & auto shutdown” , it will be show “ ---“ in display if soldering iron not use for over 20 minutes, by now the temperature of soldering tip will be down to 200 °C if the setting working temperature greater or equal to 200 °C or down to 50°C if the setting working temperature below 200 °C , station will keep this temperature until recover the soldering.


There are three ways to wake up sleeping:

1. Turn off the power switch and then turn on again.

2. Press any button in Station.

3. Pick up the soldering iron.


Please attention that it can’t wake up If the Soldering station over 40 minutes in sleeping condition, soldering iron will cut off the power supply in automatically and no any showing in display.








Total: 0 [Show All]  Related Reviews
More »Our Others Products

[ ProductsSearch ]  [ Add To Favourite ]  [ Tell Friends ]  [ Print Content ]  [ Violation Report ]  [ Close Window ]